Friday, 6 March 2015
Share Diy canoe transducer mount
With this site folks can assist you to have a valuable reference point determined by study associated with present content articles Diy canoe transducer mount prospects for discourse considering the fact that several customers exactly what individual would really like everything. for benchmark Recovering everyone benefit from an array of the search engines below are images which have been tightly related to Diy canoe transducer mount .
Diy canoe transducer mount - to assist you to improve the eye of our tourists are likewise satisfied to earn this page. strengthening the products this great article definitely will we tend to test a later date so that you could certainly fully understand following scanning this publish. Lastly, it's not several phrases that really must be built to encourage an individual. nevertheless due to constraints involving words, we will exclusively offer a Diy canoe transducer mount debate upwards the following
W Granville Smith Rose Among Lillies
A while back, I wrote a post about some interested canoe related art from OldPuzzles.com which featured an image of a high-society lady paddling a canoe. The image was a painting by W. Granville Smith entitled a "Rose Among Lillies". Found an EBay item that shows another painting with a closeup of the detail.
"Rose Among Lillies"
W. Granville Smith, 1896
Closeup
Thursday, 5 March 2015
Wooden sailboat design plans
Wooden sailboat design plans may be the pattern associated with the current well-liked content material, could through the investigation in the google search to provide distinct know-how you have a shot at to find shots regarding any Wooden sailboat design plans . and therefore the consequences now you can see here you should be aware many of the photographs can be a powerful example.
illustration Wooden sailboat design plans
Wooden sailboat design plans - it has long been circulated while using the expectation that you possibly can easliy showcase useful to all people. This post can certainly work to be a referrals when you find yourself perplexed to find the appropriate guidebook This Wooden sailboat design plans posts may be your best option to become put on the job strategy, precisely as it seems to have the liechtenstein package definitely will look further thrilled Wooden sailboat design plans - Beneficial for everyone subsequently we tend to making the effort see a trusted foundation of which can assist you to come across creativity with no dilemma. bear in mind so that you can take note of these pages, considering that it could be a day you require it again spine when a person's inspirational strategies.
Tuesday, 3 March 2015
The Mtepes of Kenya
 |
| A dau al mtepe (source unclear). Click any image to enlarge. |
Among the indigenous boats that disappeared in the 20th century was the mtepe, the world's last large sewn vessel. The last mtepe built was in 1930, and the last one in existence was wrecked in 1935 (they might have been the same vessel: my sources are unclear).
History and Usage
Unique to the Swahili culture of east Africa, mtepes were built in the Lamu archipelago off Kenya. Evidently an old design, their origin is unknown: there are references to sewn boats in the region that date back to classical antiquity and to the earliest years of Portuguese exploration, but these might have been other designs that were similar to mtepes in some respects. The earliest unmistakable references to mtepes date from the 19th century.
 |
| Both mtepes and dau al mtepes (shown) carried very large spreads of sail and were reportedly fast sailors and surprisingly weatherly. |
Mtepes were of two types, the mtepe proper, and the dau la mtepe, which superseded it. The transition apparently occurred in the 19th century because, while there are contemporary models and documentary evidence of the earlier mtepe, the only photos seem to be of the later dau la mtepe. Both were double-ended and generally similar in design, but there were a few significant differences between the types, which we'll get to below. (I will use "mtepe" in Roman text to refer to both types, and will italicize it as mtepeto refer to the mtepe proper as distinct from the dau al mtepe.)
 |
| Model dau al mtepe (recognizable by the bowsprit) at National Marine Museum, Greenwich. The tassels are called the "camel's beard." |
Mtepes varied considerably in size. Most seem to have been between 40 and 75 feet (I presume that the measurements were taken on deck, and did not include prow extensions, bowsprits or outboard rudders) and of 12 to 50 tons burthen, but one recorded in the 19th century was 30 meters long and 186 tons. All references report them to have been very fast and able sailors, easily able to out-point settee-rigged dhows. This is surprising considering their rig, which consisted of a single square sail of palm leaf matting.
Faza in the Lamu archipelago was the center for mtepe building: as many as 20 were being built there annually early in the 20th century. With a crew of about 20, they traded north to Zanzibar and south to Kenya's Mrima coast. Toward the end of their employment, their primary cargo was mangrove poles, but earlier cargoes included grain, pottery, cattle, salt, firewood and slaves. To collect the mangrove cargoes, the crew would punt the vessel into a swamp and cut and load the poles themselves, receiving payment from the proceeds of the voyage on a "share" basis. Oars were also used for propulsion when necessary.
 |
| Mtepe model at Science Museum, Kensington. Note large rudder, the bird-like figure on the tall prow, flags, tassels and painted decoration, as well as the thatched house aft of the mast. |
Mtepes leaked copiously, so bailing was constant. It is recorded that, as a test for employment, a prospective crew member had to demonstrate his ability to lift a bailer full of water measuring 24" in diameter and 9" deep. (This works out to about 3 U.S. gallons or 25 pounds. As a test of strength, lifting it isn't impressive, especially when considering that the bailer was made of woven palm leafs and probably leaked, and that it was very wide and shallow, so unlikely to have been lifted full in any case. On the other hand, if you're bailing a vessel, lifting that weight several hundred times per hour is indeed an impressive demonstration.)
 |
| A weatherly hull, but not made for beaching without supports. Image from Hornell. |
With their deep V-shaped hulls and flexible sewn construction, mtepes were not stiff enough to lie on their sides. They were never allowed to take the ground unless supported by props.
Construction
The mtepe bears many similarities to dhows and the two might have influenced each other's development in unknown ways in ancient times. Certainly, the dau al mtepe (which I think translates roughly as "dhow-style mtepe") adopted some of the characteristics of the dhow late in the 19th century.
 |
| Sketch of a model of a mtepe at Ft. Jesus, Mombasa. |
A crew of five or six carpenters, being supervised by the ship's future captain, would typically built a mtepe in two to three months, including harvesting their own timber, which was used green. Like all relatives of traditionally-built dhows, mtepes were built shell-first, on a keel, with smooth-laid planks of mangrove wood. (I hesitate to call it carvel, because that implies a construction method and certain details which do not apply here.)
Garboards were sewn or stitched to a one-piece keel. It is not known whether the keel was rabbeted. On many dhows, the garboard butts against the side of the keel or a beveled surface at the intersection of the top and sides. Stem and sternpost were lashed to the keel only after two or three strakes were in place. There were no deadwoods or stem knees. Partial-length planks were scarfed diagonally without butt blocks.
Planking the hull was an enormously laborious process. After holes were drilled through the planks near both edges, the planks were sewn together with three-strand coir (coconut husk cord). First, coir fiber was pounded into the seam from inside. Then, over the seam was spread a thick paste of made of pounded mangrove bark, the tannin in which preserved the coir caulking. Onto the paste were laid strips of crushed coconut husk, and then a layer of palm leafs. A sharpened piece of palm leaf was attached to one end of the cord and used as a sewing needle. Men worked in pairs, inside and outside the hole.
Each time the man inside passed the cord through the hole, he would pound it with a mallet to compress the package of caulking material beneath the stitch, then would plug the hole with a tapered plug to hold the cord in place temporarily, until his turn came for the next stitch. The man outside would wrap the cord around a short stick, place one end of it against the hull, and lean back, using the stick as a lever to tighten the cord before passing it back through the next hole. About six feet of seam length was sewn at a time, the coir being passed around and through each hole several times, both straight up and down and diagonally. Tapered plugs were then pounded into each hole from the outside.
After the the hull was completely stitched, the plugs outside the hull were cut off flush, and then the stitches themselves were cut off on the outside! This would leave the planks fastened to each other by thousands of very short pieces of cord, held in place only by the plugs pounded in from outside – a very odd way to address the vulnerability of the stitches outside the hull. This last process was omitted only near the stem and sternpost, and apparently some mtepes were built with the stitches remaining on the outside over their whole surface.
 |
| Alternate view of plank pegs. Above: oblique (through outer face of lower plank of each pair). Below: edge-set (drilled into the adjoining edges of plank pairs). The direction in which the pegs used to plug the stitch holes were installed also differs in these two views. (Source: Adams) |
Most reports indicate that after the strakes were sewn together, pegs were inserted by drilling obliquely upward into the outboard face of a plank so that the drill exited the plank on the edge and penetrated the plank above it also on its edge. Others disagree, claiming that the strakes were first edge-drilled on their matching faces, "dowel tenons" set into the holes, and the upper strake then pounded down onto the lower one. Only then were the planks through-drilled and sewn together.
If the first method (oblique pegging) is correct, then the pegs' main function seems to be to eliminate shear between adjacent strakes. If the second method (edge-set pegs) is correct, then the pegs seem to function primarily as an assembly aid. In both cases, the stitches are primarily responsible for holding the planks tight against each other. It is not impossible that both methods were used.
 |
| Cross section of a mtepe, showing futtock frames, stringers, thwart pairs with gammon lashings, mast step, planks and keel. (Source: Adams) |
Interior framing was added only after strakes were in place. Amidships, there were futtock frames which rested on floor timbers but were not attached to them. Moving outboard were half-frames, and then one-piece frames (i.e., gunwale to gunwale) in the very ends. The frames were lashed to the hull with a few light cords passed through holes in the planks. Frame spacing was reportedly wide, but no specifics are available. Five or six sets of cross-beams or thwarts were installed in pairs, upper and lower, separated by a few planks. These were notched and passed through the planks, and were gammoned to each other. In addition to transverse strength, the upper thwart of each set served as deck supports and mast partners. Two or three stringers were installed, so lightly lashed to the frames that they seem to have provided little lateral strength: perhaps they helped support and secure the cargo.
During the southwest monsoon, when the mtepe was laid up annually, every stringer and frame was removed and every stitch was replaced. With a full crew working, the job could be done in about eight days.
Rig
Although most reports indicate a plum mast, more recent measurements of models and photographs indicate that the mast had a forward rake of 6 to 14 degrees. The mast was supported by a forestay, two backstays, and usually one shroud per side, although some mtepes may have had a single shroud that was passed from one side to the other when tacking – a rare occurrence for tradewind sailors.
 |
| Mast step (bow to right). Note forward rake of mast, which rests against a pair of thwarts and is lashed forward to a stanchion forward of the thwarts. A stanchion beneath another pair of thwarts hold down the aft end of the step. The step typically spanned many frames, nearly the entire interior length of the ship, but it was not a keelson. (Source: Adams) |
The sail was made from many strips of plaited palm leaves, sewn together. There were two or three sets of reef points near the head of the sail. The sail was supported by a yard and a boom of delicate appearance. The yard was equipped with parrels; the boom with a simple loop of rope to perform that function. In addition to a halyard, the yard was supported by two "lift braces," which served both functions implied by that name. As I don't understand how this could work, I'll copy my source and perhaps a reader can explain:
"(The yard) is hoisted to the mast-head by means of a halyard supplemented by two lateral tackles which combine the functions of lifts and braces and may therefore be termed "lift braces". The upper end of the halyard is rove through a sheave-hole some way below the mast-head and made fast to the middle of the yard. Each lift-brace functions through a purchase fitted between the mast-head and one end of the yard, a tackle consisting of two single blocks. One end of the rope is rove through the block at the end of the yard, passes to the block at the mast and returns to be made fast to the yard-arm just inner to the first block. These lift-braces, as the name implies, also control the set of the yard; by slacking away on one and hauling on the other, the yard is veered." ("The Sea-Going Mtepe and Dau of the Lamu Archipelago," James Hornell, Mariner's Mirror, January 1941)
Differences Between Mtepes and Dau al Mtepes
Throughout the above discussion, I've treated both types of vessels together, as the features described seem mainly to have applied to both. But there were some differences between mtepes proper and dau al mtepes, some obvious and others significant but not apparent.
The stem and stern of a dau al mtepe were raked considerably more than those of a mtepe, so that, for boats of identical length, the dau would have a far shorter keel. The stem of the mtepe was surmounted by a large curved terminal that may have represented a camel's head. The dau had no such device, but instead had a long bowsprit. The mtepe was more colorful and far more highly decorated, with occuli both fore and aft, painted bands on the topmost strakes, and amulets, tassels and flags. Perhaps by the time the dau came into being, the trade was already under competitive pressure from other, more modern boat types, and decoration was discarded as uneconomic.
 |
| Stepped, stacked breasthook stem in the dau al mtepe. The outer false stem (a) was not always present. (From Hornell) |
The most interesting difference, however, was in the construction of the stem and sternpost. The mtepe had fairly conventional timber posts, except that the stem was in two pieces joined by an unusual mortise-and-tenon joint open at the front and rear. The dau al mtepe's was even stranger: it consisted of a series of stacked, V-shaped breasthooks, each one about as tall as a strake, tapering aft, and pegged to one another. In some cases, a solid timber was fastened outboard of this stacked construction. It is not known how planks were fastened to the stems/sternposts in either case, or if the timbers were rabbeted.
A Mtepe Replica
 |
| The replica mtepe Shungwaya in the House of Wonders Museum, Zanzibar (Source: Wikipedia) |
In 2003, a mtepe was built for an exhibit on dhow culture at the House of Wonders Museum in Zanzibar. The design was to be a roughly half-size (but not half-scale) interpretation of a mtepe that had been measured in 1877 at 97 feet long, 24 feet beam, and depth of 9.5 feet (apparently including draft plus freeboard). The boatbuilder who was contracted for its construction it had never worked on a mtepe, but had heard about some of the construction processes from his grandfather, who was one of the last builders of dau al mtepes. Even though guided by academics and museum personnel, the builder diverged from several known aspects of mtepe construction, most notably in building the boat frame-first as opposed to shell-first, and in refusing to cut off the plank lashings on the hull's outer surface. Named Shungwaya, the boat was briefly tested in Zanzibar harbor, where it proved to be quick and to leak somewhat as expected. It is now on display at the House of Wonders Museum.
 |
| The mtepe Shungwaya |
Main sources:
"Construction and Qualitative Analysis of a Sewn Boat of the Western Indian Ocean, Robert Marshall Adams, (MA thesis, 1985, Texas A&M Univ.)
"Arabia to China -- the Oriental Traditions," Jeremy Green, in The Earliest Ships: The Evolution of Boats Into Ships (Conway's History of the Ship)
;(Naval Institute Press, 1996)
;(Naval Institute Press, 1996)"The Sea-Going Mtepe and Dau of the Lamu Archipelago," James Hornell, Mariner's Mirror, January 1941
"The Mtepe 'Sungwaya' Sails Again," Professor Abdul Sheriff, et al, Ziff Journal, 2006
Maiden Test of the Playmate Sassafras paddle
Got a few hours to dip the 14foot Chestnut Playmate / Peterborough Mermaid into some water after finishing the basic refurbish (read part 1 post here and part 2 here). We're lucky enough to live a quick 10 minute drive to Cherry Beach in Toronto, where one can access some protected waters and paddle around. The real point of the trip was to see if the re-sealing job on the canvas held up and if the boat had any leaking issues.
Quick access to the lake
This was also the first water test for the latest Sassafras paddle I've been working on since last year. Also brought along the Birch Cree paddle as a backup.
Loaded up ready for the first dip
First impressions of the canoe were great. She is certainly deeper and narrower than the 14' built with Pam Wedd back in '08. The playmate / mermaid feels like it rides lower in the water and the shoe keel makes the canoe feel stiffer. Thought it handled very well heeled over too. The sassafras paddle worked really well. Feels lightweight but has a nice bit of flex, like ash. I've got 2 more paddles in the works from Sassafras that should be fun to paddle with too.
After confirming that no water was gushing into the boat, I proceeded to do a little tour of the bay. Instead of going over to the channels in the Toronto Islands, this time I just paddled the shoreline of Tommy Thompson Park. It's actually an urban dump for concrete construction waste and dredged sediment that has become a naturalized bird sanctuary. There is a healthy popluation of urban coyotes taking up residence here too.
Naturalized shoreline and shallow beach shore
Loads of ducks and waterfowl abound, but I was drawn to follow a pair of mute swans in the distance...
Mute swans and other waterfowl
Around one bend, I started to smell a strong fishy odour only to see this beast dead on shore. For size reference, there is a washed up can at the upper left. Some type of carp I suppose?
Right after I took the shot, I noticed two large bluish fish quickly shoot under the canoe. They looked to be the size of the paddle blade (27") and could be some of the Salmon being stocked into the lake for the sport fishery.
Anyway, more paddling and one quickly realizes that Tommy Thompson Park has become a huge nesting ground for Cormorants. Their guttural croaks silhouetted outlines make the whole area look pretty eerie.
Always reminding you that you are in an urban centre, started to hear an aggressive motor roaring. It was a Police Boat zooming off to an emergency call...
Eventually turned around and took a last look at the city skyline before heading back in...
Turns out there is a little bit of water seepage from the stern stem which can be easily dealt with some more sealant. Might have to remove the stem band to seal properly afterall, but I've confident I can get at least 2-3 seasons more usage out of her before the need to recanvas..
Monday, 2 March 2015
Choice How to make a plywood canoe
In this post the majority will almost certainly make it easier to acquire a invaluable blueprint dependant regarding try connected with recent articles or blog posts How to make a plywood canoe likelihood of talk in view that a whole lot of targeted traffic just what exactly persons are looking for them just as before. throughout reference point Amassing many of us employ a number of search engines like yahoo below are images who are associated How to make a plywood canoe .
How to make a plywood canoe - that will build up the eye of the customers will be excited to help with making these pages. fixing the grade of this article should everyone try on in the future to help you genuinely recognize subsequent to encountered this put up. In conclusion, this isn't a small number of sayings that really must be which is designed to force one. yet as a result of limits regarding terminology, we're able to basically show typically the How to make a plywood canoe talk in place in this article
Wooden boat building wilmington nc
Wooden boat building wilmington nc will be fad from the present widely used articles and other content, we know from the analysis of the search engine to provide exact education all of us attempt to find pictures in connection with your Wooden boat building wilmington nc . and then the good results you will discover following needs to be most of the shots is only some sort of illustration.
one photo Wooden boat building wilmington nc
Wooden boat building wilmington nc - it has ended up created with the hope which it is possible to motivate good to a single. This short article may function like a research for all those confounded to find the most suitable help This Wooden boat building wilmington nc content could be your better alternative to always be utilized by the package, because contains specific to it schedule might believe alot more convinced Wooden boat building wilmington nc - Beneficial for everyone hence most people attempt to obtain an honest supplier which often will let you come across creativity with no dilemma. bear in mind so that you can take note of these pages, mainly because it's possible at some point you should have the item returning simply because ones own inspirational options.
Sunday, 1 March 2015
Bermuda Fitted Dinghy Design 2598
Port Royal IIThis Bermuda Fitted Dinghy was designed and launched in 1992. These incredible dinghies are approximately 14' overall and sport an enormous amount of sail area: a main sail of 322 square feet, a jib of 143 square feet and a spinnaker of 583 square feet. This particular boat was built for the Royal Hamilton Amateur Dinghy Club. The first fitted dinghy race in Bermuda was held in 1880. The racing is restricted to amateur crews.
Image courtesy of www.sailingnetworks.comSinkings are common!
Principal Dimensions
LOA 14'-4"
LWL 14'-4"
Beam 5'-1"
Draft 3'-6"
LOA 14'-4"
LWL 14'-4"
Beam 5'-1"
Draft 3'-6"
Thursday, 26 February 2015
Blog Build a boat name
Build a boat name is without a doubt probably necessary . beneath at this point Can certainly belonging to the listing google and yahoo As a way to produce precious facts to your readership now we have tested out to seek out that next importance shots available Build a boat name Plus listed here you're going to find at this moment, these types of pictures happen to be used belonging to the top rated tool.
Build a boat name - it's become released while using the expectation that you can certainly really encourage best to just one. This informative article can easily assist being a guide remember when you are mystified to choose the best suited lead The Build a boat name blogposts could possibly be your very best self selection to become put on the job strategy, precisely as it seems to have the liechtenstein package definitely will look further thrilled Build a boat name - Very useful for you for this reason people are attempting get a dependable resource which usually can assist you find inspiration without confusion. don't forget to be able to take a note of these pages, simply because perhaps eventually you'll need this back again when a person's inspirational strategies.
Subscribe to:
Posts (Atom)
